Limited

6 in thermostat length|Non-mechanical seat-to-disc alignment|Thermostat is accurate and proven exclusively designed and manufactured by WATTS|Tamper-resistant bonnet screws|Series 40 and 140 feature a unique thermostat with a special thermo-bonded coating|Series 140 sizes 1 in (25 mm) and above are standardly furnished with stainless steel thermostat tube|The discharge line must be the same size as the valve outlet and must pitch downward from the valve and terminate at least 6 in (152 mm) above the floor drain where any discharge will be clearly visible, For 100DT Discharge line consult your WATTS agent|Inquire with governing authorities for local installation requirements|A relief valve functions in an emergency by discharging water, Therefore, it is essential that a discharge line be piped from the valve in order to carry the overflow to a safe place of disposal|This device is designed for emergency safety relief and shall not be used as an operating control

ANSI Z21.22|ASME Section IV|CSA Certified|MIL-V-136-12D|SA® Certified | PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm.