Pressure Reducing Valve, Standard Capacity, Series: LFN45B, 1/2 in Nominal, 25 to 75 psi, 33 to 180 deg F, Media: Water, 4-9/16 in Top to Inlet Center, Copper Silicon Alloy Body, Thermoplastic Seat/Reinforced EPDM Diaphragm, Domestic
Copper Silicon Alloy
Thermoplastic Seat/Reinforced EPDM Diaphragm
33 to 180 deg F
Top to Inlet Center:
Integral stainless steel strainer removable for cleaning Thermoplastic seat and cage Serviceable in line Sealed spring cage on all models for accessible outdoor or pit installations Bypass feature controls thermal expansion pressure The wetted surface of this product contacted by consumable water contains less than one quarter of one percent (0.25%) of lead by weight A water saving test program concluded that reducing the supply pressure from 80 to 50 psi resulted in a water savings of 30% The bypass feature will not prevent the pressure relief valve from opening on the hot water supply system with pressure above 150 psi 25 to 75 psi adjustable reduced pressure range Elastomer disc 50 psi standard reduced pressure Viega ProPress® connections are factory-installed fitting on each end of the approved/certified assembly
ASSE 1003|ANSI A112.26.2|CSA B356|IAPMO Listed|NSF/ANSI 61-G|UPC Listed | PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm.