- Description
- Specifications
- Features
- Documents
Zoeller® Submersible Pump, Single Seal Non-Automatic, Series: Mighty-Mate 50, 43 gpm, 1-1/2 in NPT Outlet, 19-1/4 ft Maximum Head, 3/10 hp, 115 VAC, 9.7 A, 60 Hz Frequency, 1 ph ph, 1550 rpm Motor, 3-Wire Cord, Non-Clogging Vortex Impeller, 130 deg F, Auto Reset Thermal Overload Enclosure, Sleeve Bearing, Cast Iron, 10-3/32 in W x 10-1/16 in H Dimensions
Amperage Rating:
9.7 A
Domestic/Import:
Domestic
Flow Rate:
43 gpm
Frequency Rating:
60 Hz
Material:
Cast Iron
Outlet Size:
1-1/2 in NPT
Temperature Rating:
130 deg F
Voltage Rating:
115 VAC
Application Type:
Water Transfer, Sump and Effluent Systems, Light Commercial, New Sump and Residential Construction
Horsepower:
3/10 hp
Phase:
1 ph
Motor Speed:
1550 rpm
Warranty Length
Limited
Features
Float-operated, submersible, 2-pole mechanical switch and variable level, long-cycle systems|Corrosion-resistant, powder coated epoxy finish|No steel sheet metal parts to rust or corrode|Stainless steel screws, guard, handle and switch arm|No screens to clog|Watertight neoprene square ring between motor and pump housing|Solid, buoyant, polypropylene float|oil filled, hermetically-sealed, automatic reset thermal overload protected motor|Upper and lower sleeve bearings running in bath of oil|Entire unit pressure-tested after assembly|Carbon and ceramic shaft seal|Passes 1/2 in spherical solids|Watertight and dust-tight|Permanently oiled bearings|7-1/4 in on point, 3 in off point|Cast iron switch case, motor and pump housing|Engineered thermoplastic base|Engineered, glass-filled, plastic impeller with metal insert|Stainless steel guard and handle|Lower and upper bearings, oil-fed cast iron
Standard Approvals
CSA Certified|SSPMA Standard|UL Listed