- Description
- Specifications
- Features
- Documents
Homestead® Lubricated Plug Valve, Series: 612, 3 in Nominal, Flanged, 200 psi CWP, 200 lb WOG/150 lb SWP, -20 to 150 deg F, Standard Port, Wrench Actuator, 8 in Inlet to Outlet Length, 6-1/4 in Top to Inlet Center, Cast Iron Body, Steel Trim, FKM O-Ring
Actuator Type:
Wrench
Body Material:
Cast Iron
End Style:
Flanged
Nominal Size:
3 in
Pressure Rating:
200 psi CWP
Pressure Class:
200 lb WOG/150 lb SWP
Temperature Rating:
-20 to 150 deg F
Softgoods Material:
FKM O-Ring
Trim Material:
Steel
Inlet to Outlet Length:
8 in
Port Type:
Standard
Top to Inlet Center:
6-1/4 in
Features
Standard material is high tensile ASTM A126 Class B cast iron, ASTM A536 65-45-12 ductile iron is also available for high temperature applications|Flange thickness, diameter and drilling fully conform to ANSI B16.1 Class 125|Plug valves are usually lower in cost and lighter in weight than comparable gate or globe valves|Only a small initial injection of sealant, with minimal follow-up sealing, is required for positive shut-off|Minimal quick and easy follow-up sealing assures long lasting service|Single solid-piece plug design features true bi-directional seating and low vibration operation|Various port configurations make them suitable for a wide range of applications|A thin film of sealant not only forms an incompressible seal to prevent gas or liquid leakage, but also reduces friction between the body and plug, offering low torque operation|Metal to metal seating assures long life, with no rubber to wear|Every valve is 100% leak-tested before shipment to ensure reliable shut-off|10-1/2 in L wrench
Standard Approvals
ASTM A126 Class B Body|ANSI B16.1 Class 125|CSA Certified|UL Listed