LD141 series Suitable for end of line service (bidirectional dead end service) to rated pressure (2 to 24 in)|The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average|Buna-N stem seal and glass reinforced epoxy resin bushing|Black EPDM seat|The face-to-face dimensions were designed to comply with MSS SP-67 and API 609|Through shaft assures positive disc positioning and dependable performance|Weather seal shaft equipped with weather seal to prevent external media from entering the shaft bore|Square shaft-to-disc connection provides a robust shaft-to-disc connection without pins or bolts|Three bushings supports shaft at three locations to enhance shaft alignment and absorb actuator side thrusts|Factory tested to 110% of full rated pressure in both directions before shipping|Profiled disc design precision machined disc edge creates Bubble tight shut-off, primary seal|Shaft seal the shaft Dia is greater than the Dia of the seat's shaft hole creating a robust shaft seal|All valves are 100% factory tested before shipping

ANSI Specified|API 609|ASTM A536 Body|AWWA C-504|CRN OC/2102CL|Federal Public Law 111-380|ANSI 3rd Party Approved|MSS SP67-2002a|NSF/ANSI 372 Lead-Free|NSF/ANSI 61|PROP65: Cancer and Reproductive Harm