- Description
- Specifications
- Features
- Documents
Apollo™, LD-141-06-B-E-1-1, Butterfly Valve, Resilient Seated Lug Style, Series: LD141, 6 in Nominal, Flanged End Style, 125/150 lb Pressure Class, -20 to 250 deg F Intermittent/225 deg F Continuous, 10-Position Handle Actuator, 8.88 in Top to Inlet Center, Ductile Iron Body, Aluminum Bronze Disc, EPDM Softgoods
Actuator Type:
10-Position Handle
Body Material:
Ductile Iron
End Style:
Flanged
Nominal Size:
6 in
Disc Material:
Aluminum Bronze
Pressure Class:
125/150 lb
Temperature Rating:
-20 to 250 deg F Intermittent/225 deg F Continuous
Softgoods Material:
EPDM
Top to Inlet Center:
8.88 in
Features
Compatible with ANSI 125 lb and 150 lb flanges|ISO 5211 top plate allows choice of Apollo™ pneumatic actuators and gear operators|LD141 series Suitable for end of line service (bidirectional dead end service) to rated pressure (2 to 24 in)|3 to 24 in meet performance requirements of AWWA C-504|The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average|ASTM A276 type 416 stainless steel standard shaft|Buna-N stem seal and glass reinforced epoxy resin bushing|Black EPDM seat|Valves are full lug with tapped lugs, to ANSI 125/150 drilling|The face-to-face dimensions were designed to comply with MSS SP-67 and API 609|Through shaft assures positive disc positioning and dependable performance|Weather seal shaft equipped with weather seal to prevent external media from entering the shaft bore|Square shaft-to-disc connection provides a robust shaft-to-disc connection without pins or bolts|Three bushings supports shaft at three locations to enhance shaft alignment and absorb actuator side thrusts|Factory tested to 110% of full rated pressure in both directions before shipping|Profiled disc design precision machined disc edge creates Bubble tight shut-off, primary seal|Shaft seal the shaft Dia is greater than the Dia of the seat's shaft hole creating a robust shaft seal|All valves are 100% factory tested before shipping
Standard Approvals
ANSI Specified|API 609|ASTM A536 Body|AWWA C-504|CRN OC/2102CL|Federal Public Law 111-380|ANSI 3rd Party Approved|MSS SP67-2002a|NSF/ANSI 372 Lead-Free|NSF/ANSI 61