- Description
- Specifications
- Features
Maxitrol® Line Regulator, Lever Acting Design, Series: 325, 1-1/2 in Nominal Size, Thread, 2 psi, -40 to 205 deg F, 8 in Inlet to Outlet Length, Aluminum Body, 7.3 in H
Body Material:
Aluminum
Type:
Lever Acting Design
End Style:
Thread
Nominal Size:
1-1/2 in
Pressure Rating:
2 psi
Temperature Rating:
-40 to 205 deg F
Inlet to Outlet Length:
8 in
Features
Suitable for multi-positional mounting, If ball check vent limiting device is installed, mount in an upright position only|Note: capacities are used to determine the maximum multiple appliance load, the largest single appliance served by the regulator should not exceed the maximum individual load specified above|Minimum Regulation: Suitable for pilot flow applications|65 psi emergency exposure limit (inlet side only)|1/2 in NPT vent connection|6.1 in swing radius|Maximum Individual Load: 1250000 Btu/hr|Total load of multiple appliance combined capacity: 1250000 Btu/hr|7 to 11 in wc, 1.7 to 2.7 kPa at 2 psi (white CSA certified springs)
Standard Approvals
ANSI Z21.80|CSA 6.22 Certified Line Pressure Regulators