- Description
- Specifications
- Features
- Documents
Apollo™, 6SC10AB1LFA, Swing Check Valve, Series: 910F-LFA, 4 in Nominal, Flanged End Style, 200 psi CWP Pressure, 125 lb Pressure Class, -20 to 406 deg F, Yes Low Lead Compliance, 526 gpm Flow Rate, Full Port, Media: Water, 11-1/2 in Inlet to Outlet Length, 6.61 in Top to Inlet Center, Cast Iron/Bronze Trim, PTFE/Graphite Softgoods, Epoxy Powder Coated
Body Material:
Cast Iron
End Style:
Flanged
Finish:
Epoxy Powder Coated
Media:
Water
Nominal Size:
4 in
Flow Rate:
526 gpm
Pressure Rating:
200 psi CWP
Pressure Class:
125 lb
Temperature Rating:
-20 to 406 deg F
Softgoods Material:
PTFE/Graphite
Trim Material:
Cast Iron/Bronze
Inlet to Outlet Length:
11-1/2 in
Low Lead Compliance:
Yes
Port Type:
Full
Top to Inlet Center:
6.61 in
Warranty Length
5 Years
Features
The wetted surfaces of this product shall contain no more than 0.25% lead by weighted average|Buna-N stem seal and glass reinforced epoxy resin bushing|Black Buna-N seat|Polished disc edge ensures long seat life, minimal torque|1-piece wafer design with flange locating holes in larger sizes|Through shaft assures positive disc positioning and dependable performance|Square shaft-to-disc connection provides a robust shaft-to-disc connection without pins or bolts|Shaft equipped with weather seal to prevent external media from entering the shaft bore|Isolates body from process media|Valves are equipped with a stretch-resistant, non-collapsible blow-out proof seat|Phenolic stiffener ring, resilient seated|Seat design eliminates the need for flange gaskets|Designed to dimensions for easy mounting of Apollo actuators and manual operators|Supports shaft at three locations to enhance shaft alignment and absorb actuator side thrusts|Precision machined disc edge creates Bubble tight shut-off, primary seal
Standard Approvals
ASME B16.10|ASTM A126 CL B Body/Disc|Complies with Federal Public Law 111-380|ANSI 3rd Party Approved|MSS SP-71|NSF/ANSI 372 Lead-Free|NSF/AND 61|PROP65: Cancer and Reproductive Harm