Part #:
546828
MFG #
43358
Superseded
- Description
- Specifications
- Features
- Documents
RIDGID® Battery Press Tool Kit, 1/2 to 2 in, 7200 lb Ram, 5 s Crimp Time, Li-Ion Battery, 16-1/2 in L x 6-1/2 in W x 25-3/4 in H
Capacity:
1/2 to 2 in
Battery Type:
Li-Ion
Crimp Time:
5 s
Ram Force:
7200 lb
Warranty Length
Lifetime
Features
270 deg rotating swivel barrel|7200 lb hydraulic ram output|15 to 112 deg F operating temperature range|4 sec approximate cycle time|Led light for continued operations in no or low light environments|42000 cycles longest service interval in the industry|Compatible with all standard series pressing jaws and attachments from RIDGID®|For use with copper and stainless steel tubing, steel pipe, PEX and cutting soil pipe|Smaller tool increases maneuverability, reduces operator fatigue|Ultimate flexibility with the ability to switch between battery and AC power on the same tool|Perfect for getting at hard to reach connections|18 v advanced Lithium 4 battery helps the RP 340 achieve more than 400 presses per charge, and it has an industry-leading service interval of 42000 cycles|Designed to mechanically press fittings onto tubing to create a water tight and permanent seal|Switch on the RP 340 is depressed, an internal electric motor powers a hydraulic pump which forces fluid into the cylinder of the tool, forcing the ram forward and applying thousands of pounds of pressing force onto specially designed fittings|1/2 to 4 in copper and stainless steel and 1/2 to 2 in PFX capacity
Standard Approvals
ABS|CSA Certified|NSF|UL Listed