- Description
- Specifications
- Features
- Documents
Zoeller® Submersible Pump, Automatic, Series: M63, 43 gpm, 1-1/2 in NPT Outlet, 19-1/4 ft Maximum Head, 115 VAC, 9.7 A, 1 ph ph, 130 deg F, 1/3 hp, Non-Clogging Vortex Impeller, Polypropylene Float, 3-Wire Cord, Sleeve Bearing, 1/2 in Maximum Diameter of Solids, Cast Iron, Green, Powder Epoxy Coated, 10-3/32 in W x 10-1/16 in H Dimensions
Amperage Rating:
9.7 A
Color:
Green
Domestic/Import:
Domestic
Bearing Type:
Sleeve
Finish:
Powder Epoxy Coated
Material:
Cast Iron
Flow Rate:
43 gpm
Cord Type:
3-Wire
Horsepower:
1/3 hp
Phase:
1 ph
Temperature Rating:
130 deg F
Voltage Rating:
115 VAC
Outlet Size:
1-1/2 in NPT
Float Material:
Polypropylene
Impeller Type:
Non-Clogging Vortex
Maximum Diameter of Solids:
1/2 in
Maximum Head:
19-1/4 ft
Features
Float-operated, submersible, 2-pole mechanical switch integrating advanced switch technology|Corrosion resistant, powder coated epoxy|FKM outer switch boot|No sheet metal parts to rust or corrode|Stainless steel screws, switch arm, guard and handle|No screens to clog|Watertight neoprene square ring between motor and pump housing|Oil filled, hermetically-sealed, automatic reset thermal overload protected motor|Upper and lower sleeve bearings running in bath of oil|Entire unit pressure-tested after assembly|Carbon and ceramic shaft seal|Maximum temperature for effluent or dewatering 130 deg F|Passes 1/2 in (12 mm) spherical solids|Watertight and dust-tight|Permanently oiled bearings|Cast iron impeller|Solid, buoyant, polypropylene float|Oil filled cooling|Auto reset thermal overload motor protection|Stainless steel hardware and neoprene gasket
Standard Approvals
AISI 1215 Motor Shaft|cCSAus Certified|CSA Certified|C22.2 #108|SSPMA Certified|UL 778