- Description
- Specifications
- Features
- Documents
Zoeller® Submersible Pump, Series: Waste-Mate 260, 128 gpm, 2 or 3 in NPT Outlet, 21-1/2 ft Maximum Head, 1/2 hp, 230 VAC, 5.5 A, 60 Hz Frequency, 1 ph ph, 1750 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Sleeve Bearing, Cast Iron, 14-5/16 in H Dimensions
Amperage Rating:
5.5 A
Bearing Type:
Sleeve
Material:
Cast Iron
Frequency Rating:
60 Hz
Flow Rate:
128 gpm
Cord Type:
3-Wire Neoprene
Horsepower:
1/2 hp
Phase:
1 ph
Temperature Rating:
130 deg F
Voltage Rating:
230 VAC
Outlet Size:
2 or 3 in NPT
Impeller Type:
Non-Clogging Vortex
Maximum Head:
21-1/2 ft
Motor Speed:
1750 rpm
Features
Float operated 2-pole mechanical switch|Durable cast construction, ASTM Class 25 cast iron switch case and pump housing|Non-clogging vortex impeller design, engineered plastic impeller with metal inserts (1 ph)|Not affected by materials normally found in drainage and sewage pumps|Stainless steel screws, bolts, handle, guard, arm and seal assembly|Neoprene square ring and gasket|Oil filled, hermetically sealed motors|Oil-lubricated bearings|Carbon and ceramic shaft seal|Corrosion-resistant, powder coated epoxy finish|Completely submersible|Watertight and dust-tight|Automatic reset thermal overload protection (1 ph only)|12 in on point, 4 in off point|High water alarms available|10 in auto/15 in non auto, 3-wire neoprene cord and plug|Cap/motor housing/pump housing cast iron, base cast iron or engineered plastic|Upper and lower sleeve bearing|Engineered plastic with metal insert impeller, Stainless steel hardware, AISI 1215 cold rolled steel motor shaft, Neoprene gasket|Submersible sewage/effluent or dewatering pump
Standard Approvals
cSAUS Certified|UL Listed