- Description
- Specifications
- Features
- Documents
Zoeller® Submersible Effluent Pump, Single Seal, Series: High Head Flow-Mate 160, 100 gpm Maximum, Non-Automatic, 1-1/2 in NPT Outlet, 66 ft Maximum Head, 1/2 hp, 115 VAC, 15 A, 60 Hz Frequency, 1 ph ph, 3450 rpm Motor, 3-Wire Neoprene Cord, Bronze Non-Clogging Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 12-3/4 in W x 19-5/16 in H Dimensions
Amperage Rating:
15 A
Automatic/Non Automatic:
Non-Automatic
Type:
Single Seal
Bearing Type:
Ball
Material:
Cast Iron
Frequency Rating:
60 Hz
Cord Type:
3-Wire Neoprene
Horsepower:
1/2 hp
Phase:
1 ph
Temperature Rating:
130 deg F
Voltage Rating:
115 VAC
Outlet Size:
1-1/2 in NPT
Impeller Type:
Bronze Non-Clogging Vortex
Maximum Flow Rate:
100 gpm
Maximum Head:
66 ft
Motor Speed:
3450 rpm
Features
Durable, cast iron constructed switch case, base, motor and pump housing|Cast iron class 25 to 30 (25000X tensile strength)|Impeller bronze class 85-5-5-5|Corrosion resistant, powder coated epoxy|Oil filled, hermetically-sealed, automatic reset thermal overload protected motor|Upper and lower ball bearings running in bath of oil|Carbon and ceramic shaft seal|No screens to clog|Neoprene square ring and gasket|Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly|Passes 3/4 in (19 mm) spherical solids|On point - 14-3/4 in, off point - 5 in|100% of units are computerized tested
Standard Approvals
cCSAus Certified|SAE 1117 Carbon Steel Motor Shaft|SSPMA Certified|UL Listed