- Features
 - Specifications
 
Features
- The A-3000 model has a unique circuit that contains two separate cut-on and cutoff mechanisms
 - The cone valve: diaphragm valve circuit gives a high speed cut-on regardless of type of control used
 - The solenoid bypassing circuit can be used to achieve cut-on and cut-off at full operation speed, it provides cut-off at full operating speed regardless of which type of control is used
 - The pump circuit contains a positive displacement involute gear set and four controlling valves
 - Fuel oil No 2 and lighter or fuel oil No 4 and lighter, not compatible for use with blends higher than 5% biodiesel
 - One pipe system (two-pipe system possible)
 - 9 W consumption
 - 5/16 in strainer
 - 60 Hz recommended motor frequency
 - Suitable for use with a standard primary control, or a pre-purge/post-purge primary control
 - Normal cut on with a pre-purge primary control is 3450 rpm
 - Normal cut off with or without a post-purge primary control is 3450 rpm
 - The diaphragm valve insures cutoff at burner shut down
 
Standard Approvals
- UL Listed
 
Domestic/Import:
Domestic
Finish:
Black
Flow Rate:
3 gph
Mounting Type:
Flanged
Number of Stages:
1
Pressure Rating:
100 to 200 psi
Speed:
3450 rpm
Temperature Rating:
50 to 115 deg F


