Saniflo® 082 Saniaccess® Macerator Pump, 1.28 gpf Flow Rate, 2 in Inlet, 0.5 hp
| Brand | Saniflo® |
| MFR Part No | 082 |
| TSCO Part Number | 430025 |
- Features
- Specifications
- Documents
Warranty Length
- 2 Year Warranty
Features
- The most advanced macerator in the world with dual accessibility
- For full bathroom applications
- 15 ft vertical and/or 150 ft horizontal discharge
- Easy dual access service panels
- Discharges the waste through a 3/4 or 1 in rigid pipe
- Non-return valve is included on the discharge elbow assembly provided with the system
- Elbow can be rotated 360 deg depending on the discharge installation
- Has been designed with a 1-1/2 in vent connection on the top of the lid
- All plumbing codes require connection to a vent system
- Must be connected to Saniflo® 1.28 gpf rear discharge toilet
- Will also discharge gray water from any sink, bath/shower or urinal
- Wastewater will drain into the system via two 2 in inlets with built-in check valves on either side of the housing, note that when adding a bathtub/shower, the base should be raised up by a minimum of 6 in off the floor
- 0.5 hp oil-filled thermally protected motor
- 45 uF capacitor
- 51 in power cord
- ≤ 53 dBA noise level measured at 3 ft
Standard Approvals
- ADA Compliant
- ASME A112.3.4
- CSA B45.9
- UPC Listed
- WaterSense EPA Certified
Videos
Amperage Rating:
4.5 A
Capacity:
3.1 gallons
Cord Length:
51 in
Dimensions:
18-3/4 in W x 6-3/4 in D x 10-3/4 in H
Discharge Size:
3/4 in or 1 in
Flow Rate:
1.28 gpf
Frequency Rating:
60 Hz
Height:
10-3/4 in
Horsepower:
0.5 hp
Inlet Size:
2 in
Motor Speed:
3600 RPM, tested over 50,000 cycles
Temperature Rating:
104 deg F
Voltage Rating:
115 V AC
Type:
Macerator
Application Type:
Residential Applications