- Description
- Specifications
- Features
- Documents
NTI Indirect Water Heater, Series: S Series, 155 MBtu/hr Heating, 40 gal Tank, 10 gpm, 3/4 in Water Connection, 181 gal at 140 deg F Recovery, 150 psi, 190 deg F Tank/210 deg F Boiler, Ultra Low Nox: No, 444 Stainless Steel, 20-1/8 in Dia x 56 in H
Material:
444 Stainless Steel
Flow Rate:
10 gpm
Pressure Rating:
150 psi
Temperature Rating:
190 deg F Tank/210 deg F Boiler
Heating Capacity:
155 MBtu/hr
Recovery Rate:
181 gal at 140 deg F
Water Connection:
3/4 in
Tank Capacity:
40 gal
Ultra Low NOx:
No
Warranty Length
Limited Lifetime
Features
Tank and coil is constructed out of type 444 stainless steel|Tanks are completely pickled, rinsed and passivated inside and outside to remove all surface contaminations and restore the chromium oxide layer of the stainless steel surface|Fittings are constructed out of type 316L stainless steel|Lead free construction|Insulated with CFC free 2 inch thick Expanded Polystyrene (EPS) foam|Outer shell is constructed out of durable grey plastic|3/4 in FNPT temperature and pressure relief valve connection|Stainless steel well for insertion of tank sensor or aquastat|Tank sensor incorporates a 10K thermistor and a UL353 rated normally closed safety switch|Tank sensor connects directly to a Vmax or Trinity Tft, Tx or Lx boiler|Tank sensor allows the tank temperature to be controlled from the boiler|Endless hot water|Life-long operation|Combine with a solar system