- Features
 - Specifications
 - Documents
 
Warranty Length
- 1 Year from Date of Install/2 Years from Date of Manufacturing
 
Features
- Pump diameter is smaller than a standard 4-inch submersible for easier installation in reduced diameter 4 in wells
 - Hex rubber bearing and ceramic shaft sleeve allows sand and abrasives to pass through, virtually eliminating shaft wear and upper bearing failures
 - Improved hydraulic performance for deeper set depths at all horsepower and flow ratings
 - Floating stage design allows for maximum efficiency while minimizing the downthrust load that is transferred to the motor
 - Modified PPO diffuser and disc with 300 Series stainless steel thrust and eye seal protection for durability and abrasion resistance
 - Acetal impeller provides high performance to increase pressure output while reducing system losses from friction
 - Removable spring-loaded check valve
 - Stainless steel pump intake screen and stainless steel cable guard
 - 86 deg F Motor Ambient Temperature Rating Nominal
 - Powered by corrosion-resistant Franklin Electric submersible 4-inch motor with lightning protection
 
Standard Approvals
- CSA Certified
 - ANSI/NSF Standard 61
 
Videos
Amperage Rating:
6 A
Bearing Type:
Kingsbury Thrust
Dimensions:
28.5 in L
Flow Rate:
5 gpm
Frequency Rating:
60 Hz
Impeller Type:
Acetal
Material:
AISI 304 Stainless Steel/Thermoplastic
Phase:
1
Power Rating:
1/2 hp
Series:
J Class 3200
Service Factor:
60 %
Temperature Rating:
120 deg F
Type:
Submersible
Voltage Rating:
230VAC
Number of Stages:
13
Number of Wires:
2


